044 Datalinking

To data link AIR to AIR....
1. Sender designates a TOI (target of interest) with curosor in FCR, TMS UP
2. Sender presses one of  OSB 7 - 10 depending on which group member to recieve the info.
3. Receiver sees the target on his FCR with yellow half box, and his group number over it.
4. Receiver designates with cursor and TMS UP.

To data link AIR to GROUND
1. Sender makes a mark point, with ICP7 (starts at SP26), and selects this as current SP
2. Sender makes HSD SOI,
2. Sender presses IFF IN (comms right), and hears 'data'
3. Receiver sees a  blue Plus on both HSD and ground FCR (if active).
4. Receiver changes SP to 71 (this is where the first in coming mark gets stored).

Updated for  BMS 4.33